DC Inverter 0.75kW-630kW

Kopana le CDADA Industrial DC Inverter 0.75kW-630kW-sefate sa koloi se sebetsang hantle haholo bakeng sa ho batla lits'ebetso tsa boiketsetso tsa indasteri. E hahiloe holim'a meralo ea taolo ea DSP (Digital Signal processor) e tsoetseng pele, sesebelisoa sena se fana ka taolo ea vector ea 'nete ka kapa ntle le maikutlo a encoder, e nolofalletsang lebelo le nepahetseng, torque le ts'ebetso ea maqhubu a tlase e ke keng ea bapisoa le li-drive tse tloaelehileng tsa V / F.

E etselitsoe bakeng sa ho ikamahanya le maemo, CDADA inverter e tšehetsa mekhoa e mene ea taolo:

Taolo ea Vector ntle le PG (SVC) - e se nang kutlo, e loketse meroalo e mengata ea indasteri

Taolo ea Vector e nang le PG (VC) - ho nepahala ha loop e koetsoeng bakeng sa crane, lifti, kapa li-spindle tsa CNC

Taolo ea V/F - e bonolo, e matla bakeng sa libapali le lipompo

Taolo ea Torque - e nepahetse bakeng sa litsamaiso tse tsoelipanang, tse phutholohang le tsa tsitsipano

Ka tokiso ea liparamente tsa motlakase, lebelo la lebelo la 1:1000 (le encoder), le 180% e qalang torque ka 0.5Hz feela, e sebetsa hantle haholo lits'ebetsong tse hlokang karabelo e potlakileng, ts'ebetso e tlase e tlase, le ts'ebetso e matla ea mojaro - joalo ka li-extruder, hoist, metjhini ea masela, li-compressor le litsamaiso tsa conveyor.

E na le RS485 / Modbus, logic e hahelletsoeng ka PLC (mehato e 16), taolo ea PID, ho felloa ke matla ho palama, le phetoho ea frequency carrier (1-15kHz), inverter ea CDADA e netefatsa ts'ebetso e phahameng ea matla, tsoelo-pele ea tlhahiso, le ho hokahana habonolo lifemeng tsa sejoale-joale tse bohlale.

Lintlha tsa Bohlokoa tsa Theknoloji

Hobaneng Khetha CDADA DC Inverter 0.75kW-630kW?

■ Ts'ebetso ea 'Nete ea Vector ea Indasteri

Ha se VFD feela-e fana ka taolo e kang ea servo ntle le litšenyehelo tsa servo, ka lebaka la algorithm ea vector e shebaneng le masimo.

■ Tšebeliso e Pharalletseng ea Matla Sethaleng se le seng

Ho tloha ho lipompo tse nyenyane (0.75kW) ho ea ho li-mill tse kholo (630kW) - firmware e tšoanang, logic e tšoanang ea lenaneo.

■ Smart Automation Ready

E hahelletsoeng ka PLC + PID + Modbus e fokotsa tlhoko ea balaoli ba kantle — litšenyehelo tse tlase tsa sistimi le mehato ea maoto.

■ E matla bakeng sa Tikoloho e thata

E etselitsoe ts'ebetso e tsoelang pele ea 24/7 limela tse lerōle, tse chesang, kapa tse lerata la motlakase.

■ Tšebelisano ea Lefatše

E ts'ehetsa 380V/480V/690V AC, e nang le mefuta e fapaneng ea libese tsa DC bakeng sa betri kapa kopanyo e nchafalitsoeng.

■ Moralo oa Mosebelisi-Bohareng

Likonopo tse hole, lintlha tse hlakileng tsa liphoso, le konopo e le 'ngoe ea tokiso e nolofatsa ts'ebetso le tlhokomelo.

Lisebelisoa tse Tloaelehileng

★ Tšoaro ea Lintho: Li-conveyor, stackers, AGVs

★ Plasitiki le Rabara: Li-extruder, blowl molding, li-calender

★ Metal Processing: Litsila tse bilikang, likhoele, li-spindle tsa CNC

★ Textile: Liforeimi tse ohlang, li-looms, winders

★ Metsi & HVAC: Lipompompo tse sebetsang hantle tse nang le taolo ea khatello ea PID

★ Merafo le Samente: Li-crusher, li-fan, lipompo tse hlabang

Lipotso tse atisang ho botsoa (FAQ)

Q1: Na see ke inverter ea letsatsi kapa koloi ea liindasteri?

A1: Ena ke inverter ea liindasteri ea DC-to-AC (VFD) - e fetola libese tsa DC tse lokisitsoeng kapa li-main tsa AC hore e be 3-phase AC ho khanna likoloi. Ha se motlakase oa letsatsi / grid-tie.

Q2: "DC inverter" e bolela'ng moo?

A2: Lentsoe lena le bolela bokhoni ba eona ba ho sebetsa ho tsoa mohloling oa motlakase oa DC (mohlala, bese e tloaelehileng ea DC, betri, kapa phepelo e lokisitsoeng). Mefuta e mengata e boetse e amohela tlhahiso e tloaelehileng ea AC - sehokelo sa kahare sa DC se matlafatsa sethala sa inverter.

Q3: Na ke hloka encoder bakeng sa taolo ea vector?

A3: Che - bakeng sa lits'ebetso tse ngata, SVC (sensorless vector) e fana ka ts'ebetso e ntle haholo. Sebelisa VC (ka PG) hafeela u hloka ho nepahala ha lebelo le holimo haholo (<0.01%) kapa torque e felletseng ea zero (mohlala, lifti).

Q4: Na e ka nkela koloi ea ka ea khale ea ABB/Siemens/Yaskawa?

A4: Ho joalo. Li-inverters tsa CDADA li tšehetsa lithapo tse tloaelehileng tsa taolo, Modbus, le meaho e tšoanang ea parameter. Re fana ka litataiso tsa litšupiso tse fapaneng le lisebelisoa tsa ho falla ha paramethara bakeng sa phetisetso e se nang moeli.

Q5: Hobaneng u khetha CDADA ho feta mefuta ea lefatše?

A5: CDADA e fana ka:

● 90%+ ea tšebetso ea lihlahisoa tsa boleng bo holimo ka 60–70%.

● Ho fana ka thepa ka potlako le tšehetso ea tekheniki ea lehae limmarakeng tse ntseng li tsoela pele

● Likarolo tse tšoanang tsa mantlha: tokiso ea likoloi, taolo ea torque, Modbus, PLC

● Likhetho tsa ho itlhophisa (lets'oao la OEM, firmware e khethehileng)

● E netefalitsoe libakeng tsa indasteri tse 10,000+ lefatšeng ka bophara